How do I change Font size on Brother P Touch label maker 1950?

How do I change Font size on Brother P Touch label maker 1950?

How do I change Font size on Brother P Touch label maker 1950?

To change the size of characters,

  1. While holding down , press once, and keep. held down to display the current size setting.
  2. While still holding down , continue pressing. until the desired size setting is displayed.
  3. Release. to apply the selected size setting to the entire text.

Why is my Brother P Touch label maker not printing?

A label will not be printed if there is no text entered. Is the tape cassette installed correctly, and is there enough tape remaining? Check that the tape cassette is installed correctly, and that there is enough tape remaining.

How do I setup my Brother P Touch label maker?

Setting up the P-touch labeler

  1. Open the cassette cover.
  2. Insert the tape cassette.
  3. Close the cassette cover. If you cannot close the cassette cover, check to ensure the white lever is in the up position. If not, lift the lever, and then attach the cover. Make sure that there is no slack in the tape.

How do I change the print size on my Brother P-Touch label maker?

FAQs & Troubleshooting

  1. Press the Function (Fn / F) key.
  2. Press the Cursor ( / ) key until “SIZE” is displayed.
  3. Press the OK key or the Enter key.
  4. Press the Cursor ( / ) key until your desired size is displayed.
  5. Press the OK key or the Enter key. The selected setting is applied to the entire text. Label image. Large. Medium.

How do I change the size on my P-Touch label maker?

While holding down the “Code” key, press the “Size (2)” key. Keep the “Code” key held and press the “Size (2)” key until the desired size setting is displayed. If you select “Auto”, the P-touch machine will automatically select the largest possible size for the tape installed.

Why will my label maker not print?

This issue can occur for a few reasons. The printer may be loaded with an unsupported label size or type, the printer’s sensor may be dirty, or there may be a problem with the DYMO drivers. Make sure you are using a supported label size.

How do I reset my brother P-touch?

FAQs & Troubleshooting

  1. Turn off the P-touch.
  2. Hold down the “Shift” and the “R” keys.
  3. While holding down the “Shift” and the “R” keys, press the “On/Off” key or Power key once and then release the “Shift” and the “R” keys.
  4. “English” should be on the display. The machine has been initialised.

How many pages are in the users manual for brother pt-1950?

Brother pt-1950: users manual Hide thumbs Also See for P-Touch PT-1950 User manual- 104 pages User manual- 68 pages 1 2 3 4 5 6 7 8 9

How do I order brother accessories or supplies?

To order Brother accessories or supplies by Visa, MasterCard, Discover or American Express, you may call toll tree 1-888-879-3232, or complete the order form in your user’s guide and fax both sides of the form to 1-800-947-1445.

Where to use the P-touch 1950/1960?

En la oficina, fábrica, laboratorio, o en casa, la calidad y el rendimiento del P-touch 1950/1960 la convierten en una máquina muy práctica. Para terminar, puesto que esta guía de usuario le será de gran utilidad, le aconsejamos que la guarde en un lugar accesible para poder consultar en cualquier momento.

How do you set the mirror length on a brother printer?

When the Lengthfunction is set to ON, the Lengthindicator on the right side of the display comes on. To select the ON mirror printing setting: 1While holding down c, press ponce, and keep cheld down. 2While still holding down c, continue press- ing puntil ONis displayed. 3Release c. OFF MIRROR ABC ON MIRROR ABC LENGTH FUNCTION 37