What is the use of DriveRack?

What is the use of DriveRack?

What is the use of DriveRack?

The DriveRack® series are a diverse group of processors that provide control of equalization and loudspeaker management. Used and appreciated in every kind of venue, from houses of worship to big-name world tours, the DriveRack series are the most popular loudspeaker management systems.

What is a PA for DJ?

Usually a PA system consists of three parts: A sound source (for DJs this is your sound card or controller “line” output), an amplification system, and a speaker system.

What is RTA mic input?

The RTA-M is an omni-directional, flat frequency measurement microphone specially designed for the Driverack series to pick up all frequencies from 20 Hz to 20 kHz , ensuring accurate “pinking”/real-time analysis of your audio. It runs on phantom power (supplied by the Driverack units) and comes with a clip and case.

Where do I put my RTA mic?

The DBX forum and now official advice is to place the RTA mic on the floor on a towel, and not on a mic stand. They also imply it may be done at a shorter distance away from the speakers than the 25ft recommendation for when performed on the stand.

How do I connect my DJ controller to my laptop?

To do this, connect a USB sound card, and select it as the output in your DJ hardware, and/or your computer’s sound preferences window….Connect the controller.

  1. Plug the device directly into your computer’s USB port.
  2. Find the device in your DJ software’s “Controller,” “Hardware,” or “Settings” tab.

How do you set up a DJ controller?

Plug one end into the controller, which is your music source. The master output is a good place to plug into your controller, and it uses an RCA cable. After that, connect the other end of the cable to your speaker, if it’s powered.

Can a PA system play music?

Music can be played through a PA system by feeding the sound through one or more channels on the mixer.