What are the steps to setup a new computer?

What are the steps to setup a new computer?

What are the steps to setup a new computer?

How to Set Up and Configure a New Computer

  1. PHYSICAL SETUP – CABLES AND PORTS. If you purchased a laptop, this part is easy.
  2. HOOK UP PERIPHERALS.
  3. FIRST TIME SETUP.
  4. CONNECT TO THE INTERNET.
  5. SECURITY AND ANTIVIRUS/MALWARE.
  6. SOFTWARE AND WINDOWS UPDATES.
  7. REMOVE BLOATWARE.
  8. CREATE A BACKUP.

Whats the first thing I should do with my new PC?

9 Things to Do Before Using a New Computer

  • Review the Update Settings.
  • Check the Power Plan.
  • Battery Health and Calibration.
  • Rename Your PC.
  • Create a Recovery Drive.
  • Uninstall Bloatware and Turn Off Annoyances.
  • Create a Standard User Account with Password.
  • Create a System Restore Point.

What should I install on my newly built PC?

  1. Get Organized! You have just built your PC, but now what?
  2. Configure the Computer’s BIOS Settings.
  3. Install the Operating System.
  4. Install Drivers for Your Hardware.
  5. Secure Your Computer.
  6. Connect to the Internet.
  7. Install Security and Operating System Updates.
  8. Install Applications.

What should I check before turning on my computer for the first time?

Firing Up Your Homebuilt Computer for the First Time

  1. Make sure that the main power connector is connected to the motherboard.
  2. Check all the fans to make sure they are properly connected.
  3. Make sure that all wires and cables are safely tied away from the fans and from sharp edges of the case.

Should I plug my PC into the wall?

Plugging in your PC power cable straight to the wall sockets is fine for most modern systems that have good quality PSUs, as they do have some form of protection before anything gets to the other components. Surge protectors can ease up the mind in case of a power surge.

How much is a PC set?

A typical gaming PC will cost you between $800 and $1,200. However, if you want to run high-end games, with a 60+ frame rate on max settings, you may need to pay as much as $2,000. The final cost depends very much on what it is you’re looking to get out of your new rig.

How long does it take a new PC to boot?

The system will not boot without it. It takes only a few minutes, and you know you are putting good parts in the case. You can turn on the PC by momentarily shorting the two pins that the case power switch goes to.

How long does it take for a PC to boot up for the first time?

Once turned on, your computer takes time before it’s ready to use. You may see a few different displays flash on the screen. This process is called booting up, and it can take anywhere from 15 seconds to several minutes. Once the computer has booted up, it may be ready to use, or it may require you to log in.

Is surge protector necessary for PC?

You should use a surge protector with your computer. It is filled with voltage-sensitive components that a power surge could damage very easily. At the least, this damage will shorten the life of your computer, and it could wipe out all your data or destroy your system.