How do two speed spa pumps work?
How do two speed spa pumps work?
How do two speed spa pumps work?
The pumps primary function is to circulate the water in the hot tub. There are normally two stages of water flow. One is called the circulation cycle whereby the pump generally spins at a lower RPM (around 1,750). This stage allows water to move though the filter system thereby cleaning the water with each cycle.
How do I know if my spa pump is 2 speed?
Hot tub pumps are either a 1 or a 2 speed. Check either in your owner’s manual or the AMPS listed on the side of the pump itself. If there’s only one number there, it’s a 1-speed pump. If there are two, it’s a 2-speed.
Do I need a circulation pump on my hot tub?
The Circ Pump ensures that your water is moving and clean. While you can still purchase a hot tub without a Circ Pump, our hot tub experts at The Spa and Sauna Company recommend that you purchase a hot tub with some sort of filtration system. Hot Tubs without a Circ Pump often use a two-speed pump.
How long do spa circulation pumps last?
5-10 years
Circulation pumps tend to last 5-10 years, although your mileage may vary.
What does a circulation pump do on a hot tub?
Hot tub circulation pumps are low-flow pumps that constantly circulate in water as slowly as possible to provide your spa a continued filter, heat and chemically treated water.
How many pumps do I need in a hot tub?
two
In a two (or more) pump hot tub, Each pump will drive a set of jets or zone which typically is one side of the hot tub. A bigger hot tub will usually have more than one pump because there is room for more jets, whereas smaller hot tubs make only need a single pump.
What does the circulation pump do in a hot tub?
What is a circulation pump? It’s a low-flow hot tub pump that moves the water through the filter system — even when the hot tub is not in use. The more water that moves through the filter, the cleaner your hot tub water will be.
How do I know if my circulation pump is working?
If the circulator pump is on the RETURN side of the heating piping loop (the usual and better location) then you can feel the pipe at the circulator pump – doesn’t matter which side – in or out flow – since if the pump is running the pipe will get warm, then hot if it is successfully moving hot water out of the boiler …
How often should a hot tub circulate?
Continuously? Most residential spa owners do not need to run their hot tub pumps all the time. Unless the spa is used multiple times per day, a filtration cycle of 2-8 hours, twice a day, should be enough to keep most hot tubs sanitary.
How do you test a circulation pump?
How to check if a central heating pump is working?
- Step 1: Find the Pump.
- Step 2: Visibly inspect the pump for damage.
- Step 3: Turn off the power supply.
- Step 4: Loosen the silver plate.
- Step 5: Remove the silver plate.
- Step 6: Check if the pump shaft has seized.
- Step 7: Turn the power back on.
- Step 8: Bleed the system.